Horizontal Wrappers

LIKE NEW 2021 SHANKLIN F-1AC FW SIDE SEAL WRAPPER

THIS SYSTEM IS LIKE NEW MINT CONDITION. NEVER USED IN PRODUCTION (JUST FOR TESTING). COMES WITH COMPACT EZLOAD CENTERFOLDER, FILM PERF, BUILT IN FILM SCRAP WINDER, LOCKING CASTERS, 2 EXTENDED INFEED WHITE BELT CONVEYOR SECTIONS ( 6’ & 7’). WAS PREVIOUSLY SET UP TO RUN 44” SW SEALED AIR 2 MIL OPAQUE POLY FILM.

  • MAX. PKG. SIZE: 16”W x 6”H x INFINITE LENGTH
  • PRODUCTION SPEEDS: UP TO 60 PPM
  • FILM SPEED: UP 10 90 FPM
  • POWER: 230V; 30 AMP; 1 PH
  • SERIAL # F1AC 21031-01
  • APPROX. WEIGHT: 35OO LBS.
  • APPROX. FLOOR SPACE; 288”L x 85”W x 82”H

IT HAS A (like new) WEBER # 4300 PRO APPLY PRINTER LABELER ; w/ PRODUCT SENSING, CLEAR DETECTION PHOTOELECTRIC BAR CODE READERS, OMNIDIRECTIONAL AND CONFIGURABLE IMAGE BASED. THE PRODUCT BEING WRAPPED WAS LABLED WITH BAR CODES AND SHIPPING ADDRESSES PRIOR TO BEING SEALED. GREAT FOR E-COMMERCE PACKAGING.

Texwrap # 1810 EH w/ Texwrap 1322-02 Tunnel

1-(pre-owned) TEXWRAP # 1810 EH SIDE SEAL SHRINK WRAP SYSTEM W/ TEXWRAP # T-1322-02 SHRINK TUNNEL

2 BELT SIDE SEAL SYSTEM W/ ELECTRONIC HEAD, INTERMITTEN-MOTION SERVO CONTROLLED. W/ ALLEN BRADLEY PLC; TOUCH SCREEN CONTROL PANEL

  • CROSS SEAL WIDTH: 21”
  • CROSS SEAL JAW OPENING: 10”H X 18”W
  • MAX. PKG. SIZE: 18”W X 10”H X INFINITE LENGTH
  • MAX. FILM SPEED: 100 /FPM
  • ELECTRICAL: 208/240V; 17/20 AMPS; 1 PH.
  • AIR REQUIRED: 80 PSI
  • FLOOR SPACE: 88.5”L X 75.5”W X 75”H
  • WEIGHT: 1500 LBS.

TEXWRAP # T-1322-02 SHRINK TUNNEL

SINGLE CHAMBER FORCED AIR SHRINK TUNNEL W/ SS MESH BELT CONVEYOR. ADJUSTABLE SPEED AC DIRECT DRIVE. DIGITAL TEMPERATURE CONTROLS. TOP & BOTTOM AIR FLOW CONTROLS

  • CONVEYOR SPEED: 0-100 /FPM
  • TUNNEL CHAMBER: 13”H X 22”W X 55”L
  • FLOOR SPACE: 58”L X 45”W X 74-79”H
  • ELECTRICAL: 480V; 20 AMP; 3PH

CONFLEX FUSION SIDE SEAL SHRINK WRAPPER

Intermittent motion system with operating speeds up to 100’ film per minute. Color touch screen controls. Easy load film cradle, pin perf, w/ casters.

  • Package Dimensions: 2”L to unlimited length
  • 1”W x 22”W*
  • 1/8”H to 10”H
  • *product dependent
  • Electrical requirements: 220V; 1 PH; 20 AMPS
  • Air required: 80 PSI

TEXWRAP # 2202 SS CONTINUOUS MOTION SIDE SEAL SHRINK WRAP SYSTEM

W/ ALLEN BRADLEY PLC CONTROL, SWIVEL TOUCHSCREEN OPERATOR INTERFACE. ADJUSTABLE FILM INVERTING HEAD, PIN PERFORATOR, VARIABLE SPEED CONTROL, INFEED CONVEYOR SPEED TRIM TO CONTROL PRODUCT SPACING. WILL RUN CENTEFOLDED AS WELL AS SW SHRINK FILM. CONDITION IS VERY GOOD AND WAS USED FOR TWO MONTHS PER YEAR FOR THE THANKSGIVING AND CHRISTMAS HOLIDAYS.

MAX. PKG. SIZE: 10.5”H X 20”W X INFINITE LENGTH
MIN. PKG. SIZE: 4”L X 2”W
MAX. FILM WIDTH: SW 54”
MAX. FILM SPEED: 100’ /FPM
POWER: 240V;1 PH; 15 AMP
AIR REQUIRED: 80 PSI
FLOOR SPACE: 156.5”L X 78.25”W X 66.25”H
WEIGHT: 2800 LBS.

(pre-owned) SHANKLIN # F-5A AUTOMATIC SIDE SEAL SHRINK WRAPPER

W/FILM PIN PERF AND SCRAP FILM REMOVAL WHEEL. HAS DUAL WIRE SIDE SEAL AND 18” W HOT KNIFE END SEAL; 8’ LUGGED INFEED CONVEYOR; HAS PKG. HEIGHT EXTENSION TO 8”; HAS OUTFEED BELT VARIATOR. ON CASTERS FOR EASY MOBILITY. PREVIOUSLY RUNNING PRODUCTION IN A NATIONAL BRAND CANDY MFG.

  • A/B PLC WITH TOUCH PAD CONTROLS
  • PKG. SIZE RANGE:
    3” TO 48” IN LENGTH
  • ½” TO 16” IN WIDTH
  • 1/8” TO 8” IN HEIGHT
  • MAX. FILM SIZE: 22” CF
  • PRODUCTION SPEEDS: UP TO 75/PPM
  • POWER: 480V; 1 PH.; 10 AMP
  • AIR REQUIRED: 60 TO 90 PSI
  • FOOT PRINT: 192”L x 58” W x 58”H

(pre-owned) TEXWRAP # T-2010 ISS SIDE SEAL SHRINK SYSTEM AND # 1322-01 TUNNEL

THIS SYSTEM STILL IN PRODUCTION LINE. AVAILABLE FOR IMMEDIATE SALE. COMPACT 2 BELT INTERMITTENT MOTION SIDE SEAL SYSTEM,LARGE PRODUCT SIZE CAPACITY, EASY “TOOL-LESS” SET UP, COLOR TOUCHSREEN CONTROL W/ PRODUCT MEMORY AND MACHINE DIAGNOSTICS. INTERNAL SCRAP FILM TAKE UP. EXCELLENT RUNNING CONDITION

  • APPROXIMATLEY 9 YEARS OLD
    MAX. PKG. SIZE: 10”H X 20”W X INFINITE LENGTH
  • MIN. PKG. SIZE: 2”W X 4”L
  • MAX. FILM WIDTH: 32”CF
  • MAX. FILM SPEED: 100/FPM
  • POWER: 208/240 V; 1 PH; 22/26 AMPS
  • AIR REQUIRED: 80 PSI
  • SERIAL # T-2010-021

TEXWRAP # 1322-01 SHRINK TUNNEL ; SINGLE CHAMBER W/ SS MESH BELT;

  • ADJUSTABLE SPEED AC DIRECT DRIVE. DIGITAL TEMP. CONTROLS; TOP AND BOTTOM AIR FLOW CONTROLS.
  • SERIAL # D-1385
  • CONVEYOR SPEED: 0-100/ FPM
  • TUNNEL CHAMBER: 22”W X 13”H X 42”L
  • POWER: 240V; 3 PH; 55 AMP

(pre-owned) APM (AMERICAN PACKAGING MACHINERY) # ML-1-22 CONTINUOUS MOTION, SERVO CONTROLLED HORIZONTAL SHRINK WRAP MACHINE W/ FIXED FORMING PLOW AND THERMAL BOTTOM LAP SEAL

SET TO RUN SINGLE WOUND POF SHRINK FILM. WILL ACCOMMODATE DIFFERENT SIZES AND SHAPED PACKAGES USING PLAIN OR PRINTED FILM. HAS FILM PERF MECHANISM. HAS A 5’ LUGGED INFEED CONVEYOR (13.5” SPACING X 1 ½” H LUGS). A/B PLC PANEL VIEW 600 INTERFACE CONTROL. HAS A DOUBLE ROLL HOLDER. COMES WITH 5 EA. FORMING PLOWS CROSS SEAL BAR WIDTH: 23”

  • MAX. PKG. SIZE: LENGTH- INFINITE (depending on infeed conveyor spacing).
  • SPEED: UP TO 70./MIN. (per mfg. specs.)
  • SERIAL # 331
  • POWER: 480V; 3 PH.
  • AIR REQUIRED: 2 CFM @ 80 PSI
  • ** COMES WITH 5 EA. FORMING PLOWS: 4.25”Wx 3 3/8”H; 4 3/8”W x 1 ½”H;
  • 4 ¾”W x 4”H; 3 1/8”W x 2 ¼”H; 6”W x 3 7/8”H
  • FOOT PRINT: 158”L X 60”W

(pre-owned) AMERIPAK # 40 HORIZONTAL FLOW WRAPPER w/ 10’ SS LUGGED INFEED CONVEYOR

COMPACT DESIGN W/ADJUSTABLE FILM FORMING PLOW THAT ALLOWS FOR A FAST CHANGEOVER TO ACCOMMODATE A VARIETY OF PRODUCTS, SAVING THE COST OF ADDITIONAL FIXED FORMING PLOWS. HAS AN AMERIPAK TOUCH SCREEN CONTROL THAT PROVIDES FAST AND PRECISE PRODUCT CHANGEOVER WITH PROGRAMABLE PRODUCT SET UP. HAS DUAL ROLL HOLDER FOR FAST CHANGEOVER WITH A PIN PERF ROLLER (PERF’S CAN BE REMOVED) AND CASTERS FOR EASY MOBILITY. PRODUCT FEED FROM LEFT TO RIGHT

  • MAX. PKG.SIZE: 16”L x 7”W x 2 5/8” H
  • LUG SPACING: 19.5” PITCH: 13 TO 19.5
  • LUG HEIGHT: 3/4”
  • 1-UP END CRIMPER: 10”W
  • PRODUCT DISCHAGE CONVEYOR: 24”L x 9”W
  • POWER: 230v; 3 PH; 20 AMP
  • SER. # 405-134
  • WEIGHT: 1500 LBS.
  • FLOOR SPACE: 17’L x 38”W x 62”H

(pre-owned) AMERIPAK # 40 HORIZONTAL FLOW WRAPPER w/ 6’ SS LUGGED INFEED CONVEYOR

COMPACT DESIGN W/ADJUSTABLE FILM FORMING PLOW THAT ALLOWS FOR A FAST CHANGEOVER TO ACCOMMODATE A VARIETY OF PRODUCTS, SAVING THE COST OF ADDITIONAL FIXED FORMING PLOWS. HAS A PANASONIC TOUCH SCREEN CONTROL THAT PROVIDES FAST AND PRECISE PRODUCT CHANGEOVER WITH PROGRAMABLE PRODUCT SET UP. COMES WITH A PIN PERORATOR ROLLER AND HEAVY DUTY CASTERS FOR EASY MOBILITY. PRODUCT FEED FROM LEFT TO RIGHT

  • MAX. PKG.SIZE: 16”L x 7”W x 2 5/8” H
  • LUG SPACING: 15.5”
  • LUG HEIGHT: 1.75”
  • 1-UP END CRIMPER: 8”W
  • PRODUCT DISCHAGE CONVEYOR: 24”L x 9”W
  • POWER: 230v; 3 PH; 20 AMP
  • SER. # 401-103
  • WEIGHT: 1200 LBS.
  • FLOOR SPACE: 12’L x 42”W x 62”H

(pre-owned) TEXWRAP HIGH SPEED ORBITAL SERVO SIDE SEAL SHRINK SYSTEM

(consisting of): TEXWRAP # T-205 SS SIDE SEAL

ORBITAL MOTION SHRINK WRAPPER W/ SERVO CONTROLLED SEAL JAW, PRECISE PRODUCT CONTROL THROUGH TRANSITION ZONES (VACUUM CONVEYOR FEEDING LUGGED CONVEYOR # BTO-SA082) W/ CENTERFOLDER AND HEAT SEAL IMPULSE SEALER FOR FASTER SINGLE WOUND FILM CHANGE-OVER (AUTO-SPLICING). HAS PIN PERF. THIS IS A HEAVY DUTY SYSTEM CAPABLE OF RUNNING THREE SHIFTS PER DAY.

  • MAX. PKG. SIZE: 5”H x 20”W x INFINITE LENGTH
  • FILM WIDTH: MAX.: 27” CF AND 54”SW
  • CONVEYOR SPEED: UP TO 200 FPM
  • POWER: 208V; 3PH; 40 AMP
  • AIR REQUIRED: 80 PSI
  • WRAPPER FOOT-PRINT: 120”L X 85”W
  • WITH TEXWRAP # T-822 CM LARGE CHAMBER SHRINK TUNNEL W/ VIEWING WINDOW. RADIANT & CONVECTION HEATED TUNNEL .
  • CHAMBER: 8”H x 22”W X 84”L
  • POWER: 230V;3 PH; 50 AMP
  • FOOT PRINT: 103”L x 43”W x 66”H
  • TOTAL LINE FOOT PRINT: 28’L x 85”W
Republic Packaging, Inc © 2024 Frontier Theme