Shanklin®

LIKE NEW 2021 SHANKLIN F-1AC FW SIDE SEAL WRAPPER

THIS SYSTEM IS LIKE NEW MINT CONDITION. NEVER USED IN PRODUCTION (JUST FOR TESTING). COMES WITH COMPACT EZLOAD CENTERFOLDER, FILM PERF, BUILT IN FILM SCRAP WINDER, LOCKING CASTERS, 2 EXTENDED INFEED WHITE BELT CONVEYOR SECTIONS ( 6’ & 7’). WAS PREVIOUSLY SET UP TO RUN 44” SW SEALED AIR 2 MIL OPAQUE POLY FILM.

  • MAX. PKG. SIZE: 16”W x 6”H x INFINITE LENGTH
  • PRODUCTION SPEEDS: UP TO 60 PPM
  • FILM SPEED: UP 10 90 FPM
  • POWER: 230V; 30 AMP; 1 PH
  • SERIAL # F1AC 21031-01
  • APPROX. WEIGHT: 35OO LBS.
  • APPROX. FLOOR SPACE; 288”L x 85”W x 82”H

IT HAS A (like new) WEBER # 4300 PRO APPLY PRINTER LABELER ; w/ PRODUCT SENSING, CLEAR DETECTION PHOTOELECTRIC BAR CODE READERS, OMNIDIRECTIONAL AND CONFIGURABLE IMAGE BASED. THE PRODUCT BEING WRAPPED WAS LABLED WITH BAR CODES AND SHIPPING ADDRESSES PRIOR TO BEING SEALED. GREAT FOR E-COMMERCE PACKAGING.

SHANKLIN # T-7H SHRINK TUNNEL

W/ SS MESH BELT CONVEYOR DIGITAL TEMPERATURE CONTROL, VARIABLE SPEED CONVYOR.

  • TUNNEL PASSAGE: 22″ W X 12″ H X 42″ L
  • ELECTRIC: 230 VOLT; 3 PH; 36 AMPS
  • FLORE SPACE: 6 ½’ L x 3’ W
  • WEIGHT: 998 LBS.

SHANKLIN # T-7F SHRINK TUNNEL W/ TEFLON MESH CONVEYOR BELT.

DIGITAL TEMPERATURE CONTROL, VARIABLE SPEED CONVEYOR W/ CASTERS.

  • TUNNEL: 8”H x 22”W x 42”L
  • POWER: 230 V; 3PH.; 36 AMP
  • FOOT PRINT: 6.5’L x 4’W x 76”H
  • WEIGHT: 900 LBS.

SHANKLIN # S-26 SEMI-AUTOMATIC L-BAR SEALER

HIGH PRODUCTION SEMI-AUTOMATIC L-SEALER, INCLUDING ADJUSTABLE FILM INVERTING HEAD, EZ LOAD MOTORIZED FILM UNWIND, PIN PERFORATOR SYSTEM, AUTOMATIC DISCHARGE CONVEYOR, HOT KNIFE SEAL JAWS AND CASTERS FOR EASY MOBILITY.

  • MAX. SEAL: 24” X 16” X 8”H
  • POWER: 115V; 20 AMP
  • AIR REQUIRED: MAX. 90 PSI; MIN. 60 PSI
  • WEIGHT: 814 LBS.
  • FLOOR SPACE: 5.5’ x 4.5’

(2010) SHANKLIN # A 27A AUTOMATIC L-BAR SHRINK SYSTEM

SMOOTH BELT TO BELT TRANSFER, AUTOMATIC FILM ADVANCE, POWERED DISCHARGER CONVEYOR, ADJUSTABLE HEIGHT FILM INVERTING HEAD, HOT KNIFE SEAL JAWS, PIN PERF. AND CLOSING CONVEYOR FOR SMALL PRODUCTS.

  • SEAL AREA: 21”W x 33”L x 8” MAX. PKG. HEIGHT
  • SPEEDS: UP TO 35 PKGS./MIN.
  • POWER: 230V; 20 AMP; 1 PH
  • SERIAL # A-10030-01
  • FLOOR SPACE: 7’ x 5’
  • WEIGHT: 1515 LBS.

(PRE-OWNED) SHANKLIN # T-6XL SHRINK TUNNEL W/ SS MESH BELT CONVEYOR

ON CASTERS W/ DART CONTROLS FOR ON/OFF AND CONVEYOR SPEED

  • TUNNEL DIMENSIONS: 30”L X 18” W X 7”H
  • POWER: 230V ; 35 AMPS; 1 PH
  • FLOOR SPACE: 5’L X 3’W x 80”H
  • WEIGHT: 600 LBS.

(pre-owned) SHANKLIN #T-8PR SHRINK TUNNEL

(HIGH CAPACITY)

HAS CONTROLLED AIR FLOW, ADJUSTABLE TOP AIR DUCT, AUTOMATIC TEMPERATURE CONTROL, VARIABLE SPEED POLLY ROLLER BELT CONVEYOR. PRODUCT COOL DOWN FAN AT END OF TUNNEL.

  • TUNNEL PASSAGE: 28″ W x 16″ H x 47″ L
  • CONVEYOR LENGTH: 77″
  • ELECTRIC: 460 VOLT; 3 PH: 39 AMPS

(PRE-OWNED) SHANKLIN # T-7H SHRINK TUNNEL

W/COMPOSIT INTERLOCK CONVEYOR BELT AND EXTENDED OUTFEED SECTION. AUTOMATIC TEMPERATURE CONTROL, VARIABLE SPEED CONVYOR.

  • 22″ W X 12″ H X 42″ L
  • ELECTRIC: 208 VOLT; 3 PH; 40 AMPS
  • FLOOR SPACE: 7’L x 3’ W

(pre-owned) SHANKLIN T-72 HIGH SPEED SHRINK TUNNEL

HAS A 22” W X 12” H X 84” L TUNNEL PASSAGE. HAS DIGITAL TEMPERATURE CONTOLS. UNIT IS BULT WITH TWO SPECIALLY DESIGNED TUNNEL CHAMBERS WHICH ARE INDEPENDENTLY CONTROLLED FOR MAXIMUM SHRINK WRAPPING. CONVEYOR IS VARIABLE SPEED WITH A TEFLON MESH BELT THAT CAN RUN 25-140 FT/MIN. CONVEYOR IS 15” WIDE AND 9’ LONG. CONVEYOR HEIGHT IS ADJUSTABLE FROM 28” MIN. TO 40” MAX.

  • ELECTRIC: 208 V; 3 PH; 72 AMPS
  • WEIGHT: 2032 LBS.

(pre-owned) SHANKLIN 40” MODULAR SLEEVE WRAPPER

MODEL #B-2BB. FULLY AUTOMATIC-IN LINE-WILL WRAP UP TO 25 PACKAGES/MINUTE. HAS 42″ WIDE SEAL BAR WITH 15″ H PACKAGE CAPACITY x 40” MAX. FILM WIDTH

  • SEALING BAR HAS TOP AND BOTTOM HEAT CONTROLS
  • ELECTRIC: 460 VOLT; 1 PH; 10 AMPS
  • AIR REQUIRED: 60 P.S.I. Max.
  • GOOD RUNNING CONDITION
Republic Packaging, Inc © 2024 Frontier Theme